Vibrating Strap-On Dildo Care: Cleaning and Storage Tips

By Wet For Her | Published: 2026-11-01

Category: Tips & Care

Keep your vibrating strap-on dildo running smoothly with a simple cleaning and storage routine. Learn the steps to protect the motor, silicone, and harness.

Quick answer

Clean your vibrating strap-on dildo after every use with a silicone-safe cleanser and warm water, then dry it fully before storing it separately from the harness. Always check the charging port or battery compartment for water intrusion, and never submerge a non-waterproof toy.

Why the motor changes your cleaning routine

A vibrating dildo has seams, buttons, and a charging port that a plain silicone toy doesn't. Water and cleanser can seep into these openings and damage the electronics, so you need to be more careful about how wet you get the base. Even if the toy is marked waterproof, avoid submerging it for long periods or letting water spray directly into the port.

The velvety silicone finish on toys like the LustIt can trap lint and dust, so rinse and dry thoroughly before storage. If you use a harness, clean it separately according to its own material instructions—never soak the harness with the vibrator attached.

The drying step most people skip

Moisture left on the silicone or inside the charging port can lead to mold, odor, or corrosion. After rinsing, pat the toy dry with a clean, lint-free cloth and let it air-dry completely before putting it away. Pay special attention to the base and any textured areas where water can pool.

If your toy is rechargeable, leave the port cover open (if it has one) until fully dry. Don't rush this step—storing a damp toy is one of the most common causes of premature failure.

Step-by-step cleaning and storage

Power off and remove the harness: Turn off the vibrator and detach it from any harness or strap-on accessory before cleaning. Mistake to avoid: cleaning while it's still attached can trap water and cleanser in the harness seams.
Pre-clean with a silicone-safe wash: Apply a small amount of mild, fragrance-free soap or a dedicated silicone toy cleaner to the silicone surface. Gently work it in with your fingers, avoiding the charging port and button area. Mistake to avoid: using alcohol, bleach, or harsh cleaners that can degrade the silicone.
Rinse carefully under warm water: Rinse the toy under a gentle stream of warm (not hot) water, keeping the base and port pointed downward so water runs away from openings. If your toy is not waterproof, wipe with a damp cloth instead of rinsing. Mistake to avoid: submerging the toy or blasting water directly into the port.
Dry completely: Pat dry with a clean, lint-free towel, then let it air-dry in a well-ventilated spot before storing. Make sure the charging port and any seams are completely dry. Mistake to avoid: putting it away while still damp—this can cause mold or corrosion.
Store separately and safely: Store the vibrator in a cool, dry place away from direct sunlight, ideally in a pouch or original box to keep dust off. Keep it separate from other silicone toys to prevent material interaction. Mistake to avoid: storing it with the harness or in a damp bathroom cabinet.
Check before each use: Inspect the silicone for tears or stickiness, and test the buttons and charging port for proper function. If you notice any damage, stop using it. Mistake to avoid: ignoring small cracks that can let water in during cleaning.

Product care notes

LustIt™ - Vibrating Strap-on Dildo: Soft gel core with a powerful motor at the base and velvety silicone finish. The soft gel and motor base need gentle handling—avoid bending sharply or getting water into the base during cleaning.
LustIt™ - Vibrating Strap-on Dildo